Polymeric Sand for paver and natural stone joints up to 2″
No dust, Haze Free, No Blower, One Watering
(For Residential Application)
Supersand G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. No blower is needed and the intelligent polymeric sand requires only one watering. Supersand G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Available in Beige and Slate Grey.
- Can be used for joints up to a maximum of 5 cm (2 in) and its fine gradation allows use in even the tightest joints.
- Helps prevent weeds and damage caused by burrowing insects.
- Helps prevent erosion due to wind, rain and freeze/thaw cycles.
- Supersand G2 sets within 1 hour after water activation at above 0 C (32°F),
(no rain within 1hour after water activation).
- No Dust, Haze Free, No Blower, and one watering.
- Intact pallets can be stored outside.
If used on clay pavers, make sure they are 100% dry. Clay pavers tend to hold moisture which can prematurely activate the Supersand G2 while the sand is being spread over the paver surface, leaving a residue. Always apply on a test area before using the Supersand G2 on clay pavers.
Quantity required depends on the shape and size of the concrete pavers as well as the width of the joints.
|NARROW JOINTS||WIDE JOINTS|
|sq. m.||sq. ft.||sq. m.||sq. ft.|
|Beige, Slate Grey
50 lbs / 22.7 kg
Supersand G2 will not cause nor prevent moss, mold or mildew. Moss, mold and mildew are caused by certain on-site conditions including excess moisture, shade, absence of ventilation, inadequate cleaning or maintenance, presence of soil or other organic debris left on the product.