Romex Fugensand

Ready to Order?

For a quick answer on pricing or stock, give us a call at 508-622-1698.

Or, if you prefer, simply fill out the short form below with your quantity, location, name, phone number, and email. We’ll get back to you with a detailed quote during business hours.

Romex Fugensand is ideal for narrow joint widths from 1/16″ (1mm) to 1/4″ (5mm) and is perfect for unbonded installations. Simply sweep the sand into the joints, hose down the surface, and squeegee D7000 sealer on top. The stabilized combo creates a durable, pressure washer-safe finish built to last. Must be used with D7000 sealer.

Colors:


Stone Grey	Neutral	Basalt

Specifications:

2 in 1 stabilizer/sealer
No cement haze/residue
Works with tight paver joints
Same installation as polysand
but categorically stronger
Ant Resistant
Pressure Washer Safe
Easy to Use
Weed Resistant
One Time Install

Install Steps:

Step 1: Work Into Joints

Turn sand with a shovel then sweep into the joints with a course broom

Step 2: Compact

Use a vibratory plate as long as the surface is suitable for vibratory plates

Step 3: Top Up Joints

Refill the joints up to the top edge of the paving stone or the bevel

Step 4: Wet Surface

Wet the joints using a fine mist (Do not use a watering can)

Step 5: Apply Stabilizer

Apply ROMEX D7000 using a watering can then remove immediately with a squeegee

Application:

Product Request

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Name*

First Last

Email*

Phone*

Quantity Needed*

Specify in units or square feet if applicable.

Message*

Tell us about your project.

CAPTCHA