Ready to Order?

For a quick answer on pricing or stock, give us a call at 508-622-1698.

Or, if you prefer, simply fill out the short form below with your quantity, location, name, phone number, and email. We’ll get back to you with a detailed quote during business hours.

Romex Drain is a two-component jointing mortar mixes with water to form a slurry that flows easily into pre-wet paver joints. After 15 minutes, simply brush off the excess to reveal a highly permeable surface. Ideal for meeting strict green infrastructure permeability standards and suited for joint widths over 1/4″ (5mm).

Colors:

Romex Permeable Jointing Stone Grey Romex Permeable Jointing Neutral Romex Permeable Jointing Basalt
Stone Grey Neutral Basalt

Specifications:

  • For light traffic loads up to 3.5 T (Up to 40T with RSG)
  • Self-compacting
  • Pressure washer safe
  • Highly water-permeable
  • Frost and de-icing salt resistant
  • Ant Resistant
  • Pressure Washer Safe
  • Vehicle Rated
  • Weed Resistant
  • One Time Install

Install Steps:

Romex D1 Installation Step 1 Romex D1 Installation Step 2 Romex D1 Installation Step 3

Step 1: Mixing

Mix all components with water in a bucket or gravity mixer

Step 2: Wet Surface

Pre wet the surface with a hose

Step 3: Pour On

Dispense product onto paving surface
Romex D1 Installation Step 4 Romex D1 Installation Step 5

Step 4: Work Into Joints

Use a squeegee to distribute the mortar into the joints

Step 5: Final Cleaning

Allow the surface to partially air dry before final brooming

Application:

Product Request

"*" indicates required fields

Name*
Specify in units or square feet if applicable.
Tell us about your project.
This field is for validation purposes and should be left unchanged.

Romex Drain is a two-component jointing mortar mixes with water to form a slurry that flows easily into pre-wet paver joints. After 15 minutes, simply brush off the excess to reveal a highly permeable surface. Ideal for meeting strict green infrastructure permeability standards and suited for joint widths over 1/4″ (5mm).

Colors:

Romex Permeable Jointing Stone Grey Romex Permeable Jointing Neutral Romex Permeable Jointing Basalt
Stone Grey Neutral Basalt

Specifications:

  • For light traffic loads up to 3.5 T (Up to 40T with RSG)
  • Self-compacting
  • Pressure washer safe
  • Highly water-permeable
  • Frost and de-icing salt resistant
  • Ant Resistant
  • Pressure Washer Safe
  • Vehicle Rated
  • Weed Resistant
  • One Time Install

Install Steps:

Romex D1 Installation Step 1 Romex D1 Installation Step 2 Romex D1 Installation Step 3

Step 1: Mixing

Mix all components with water in a bucket or gravity mixer

Step 2: Wet Surface

Pre wet the surface with a hose

Step 3: Pour On

Dispense product onto paving surface
Romex D1 Installation Step 4 Romex D1 Installation Step 5

Step 4: Work Into Joints

Use a squeegee to distribute the mortar into the joints

Step 5: Final Cleaning

Allow the surface to partially air dry before final brooming

Application:

Ready to Order?

For a quick answer on pricing or stock, give us a call at 508-622-1698.

Or, if you prefer, simply fill out the short form below with your quantity, location, name, phone number, and email. We’ll get back to you with a detailed quote during business hours.

Product Request

"*" indicates required fields

Name*
Specify in units or square feet if applicable.
Tell us about your project.
This field is for validation purposes and should be left unchanged.