Dry-Treat S-Tech Concreme 80% Silane Impregnating Cream

Ready to Order?

For a quick answer on pricing or stock, give us a call at 508-622-1698.

Or, if you prefer, simply fill out the short form below with your quantity, location, name, phone number, and email. We’ll get back to you with a detailed quote during business hours.

Description

OPTIMAL PROTECTION FOR ENGINEERED CONCRETE AGAINST WATER AND CHLORIDE ION INGRESS.

S-TECH CONCREME™ water based, fully breathable, 80% silane cream, penetrates deeply into engineered concrete and forms permanent chemical bonds inside the pores to provide optimal, long lasting water repellence and protection against the ingress of water and dissolved chloride ions. It is the ideal preventative measure to maintain the condition and prolong the life of concrete structures against common forms of damage caused by water or salts, including: Efflorescence and leaching of water soluble minerals, freeze-thaw / salt spalling and picture framing. It also keeps surfaces looking good for longer and makes them easier to clean and maintain.

General Information

Typical applications:

High rise concrete structures, parking garages, highways, overpasses, bridges, wharfs, jetties.

Especially important for the protection of concrete structures in a salt water or freeze-thaw environment or where de-icing salts are used.

Suitable surfaces:

Engineered / structural / poured concrete

Benefits:

Longer dwell time maximizes penetration, bonding and water repellence
Premium protection against freeze-thaw / salt water spalling, efflorescence, picture framing and other common damage caused by water and chloride ion ingress
A 30 year per performance warranty is available – see Warranty section for details.
Easier application particularly on vertical surfaces and overhangs
Water-based emulsion for VOC ˂329 g/l – meets SCAQMD rule 1113 for reactive penetrating sealers, within 5 miles of the ocean or above 4000ft on reinforced concrete structures.
High resistance to alkaline (high pH) environments. Concrete is highly alkaline / base and can severely shorten the life of other technologies. • Able to seal hairline cracks up to 0.3 mm (0.012 in.)
Retards reinforcement corrosion (even in carbonated concrete) • Reduces alkali aggregate reactions
Non film forming so it cannot flake or peel and is resistant to UV
Studies have demonstrated that high performance silanes can extend the service life of reinforced concrete structures by over 100 years
Dry-Treat only uses silanes which produce alcohol. Dry-Treat sealer do NOT contain methoxy silanes which emit methanol and can cause blindness / death

Warranty:

A 30 year per performance warranty is available if product is applied by a level 4 Accredited Applicator at the optimal application rate (see section on Total Application Rates), according to our written instructions and guidelines and samples are provided to us for testing. Industry professionals can contact their local Dry-Treat representative or email info@drytreat.com to enquire about Accredited Applicator training and certification.

Technical Data:

Active Content: 80% n-Octyltriethoxysilane in a water-based emulsion
Specific Gravity: 0.89
Color: White to light straw yellow cream
Weight: 7.42 lbs / gallon; 0.89 kg / liter
VOCs: <329 g/L
pH: >5.5

Pack size:

USA and Asia Pacific – 5 gallon / 18.9 liter; 54 gallon / 204.5 liters; 250 gallon / 946 liter – special order
Europe – 5 Gallon (18.9Litre); 54 and 250 gallon – special order.

Product Request

Name*
First Last
Email*
Phone*
Quantity Needed*

Specify in units or square feet if applicable.
Message*
Tell us about your project.
CAPTCHA
Comments
This field is for validation purposes and should be left unchanged.

[fusion_dropcap class="fusion-content-tb-dropcap"]D[/fusion_dropcap]escription